Tripp Lite PINV3000 4-Outlet, 2-USB 3000W Portable Compact Mobile Power Inverter

General Information Heavy-Duty Power Inverter Charges and Powers Multiple Electronic Devices in Your Vehicle You don’t have to be near your computer or an AC power source to keep your mobile devices fully charged and your power tools and small appliances operating. This 3000W mobile inverter converts 12V DC power from your car, truck, fleet vehicle, boat or RV’s battery into standard 120V AC power. Just connect the included battery cables between the inverter’s DC input terminals and the positive and negative terminals on your vehicle’s battery. 4 GFCI-Protected AC Outlets Provide Portable Power for Your Mobile Applications This power inverter provides a modified sine wave for use at remote locations, such as campgrounds, construction sites and mobile offices. Four NEMA 5-15/20R outlets deliver a continuous output of 3000 watts and a peak output of 6000 watts. That’s plenty to operate a variety of appliances and power tools, such as low-power lights, camping accessories, battery chargers for small battery-operated power tools, and mobile office equipment. All outlets have OSHA-compliant GFCI (Ground-Fault Circuit Interrupter) protection to shield you from electrical hazards in case of excessive fault current. USB Charging Ports Keep Your Devices at Full Strength Two USB-A charging ports share 2 amps of charging capacity and remain active even when the inverter’s on/off switch is set to Off. This allows you to charge your smartphone, tablet, laptop, MP3 player or GPS unit without draining too much power from the vehicle’s battery. Includes the Latest Safety Features to Protect Your Equipment and Battery An on/off switch offers one-touch control over all AC outlets. If the power input from the vehicle’s battery drops below 10 volts or exceeds 16 volts, the mobile power inverter will automatically shut down. Green and red LEDs indicate normal and improper operation. The temperature controlled fans begin cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively high or low voltage conditions. Remote Control Panel Allows Power Control from 20 ft. Away A remote panel is included to extend on/off control over AC power output from a remote location. The wired panel connects to the PINV3000’s RJ11 port and can be permanently installed inside your vehicle with user-supplied hardware. This allows you to mount the inverter somewhere out of sight, like inside compartment or cabinet, and be able to operate it from your vehicle’s dashboard. The panel’s green LED confirms the inverter is powered on. Brackets Included for Permanent Mounting The heavy-duty power inverter’s durable aluminum housing is designed to withstand the rigors of road trips, campouts, business trips and family vacations. Use the built-in mounting brackets and your own hardware to install the inverter permanently in a horizontal position. Technical Information Plug/Connector Type: Terminal Block Receptacles: 4 x NEMA 5-15R Receptacles: 2 x USB Protection Type: Overload Protection Remote On/Off Capable: Yes Power Description Input Voltage: 12 V DC Output Voltage: 115 V AC Output Voltage: 120 V AC Output Voltage: 5 V DC Maximum Frequency: 60 Hz Peak Power Load: 6000 W Continuous Power Load: 3000 W Waveform Type: Pulse-width Modulated Sine Wave Physical Characteristics Color: Sky Blue Height: 4.6″ Width: 10.5″ Depth: 14.4″ Weight (Approximate): 11.29 lb Miscellaneous Additional Information: TVSS Grounding Package Contents: PINV3000 Power Inverter Battery Cable, Red/Black, 3 ft. Grounding Cable, 3 ft. PINVRM Wired Remote Panel w/20 ft. Cable Owner’s Manual Certifications & Standards: UL458:2015 6th Edition CAN/CSA-C22.2 NO.107.1:2016 4th Edition Environmentally Friendly: Yes Environmental Certification: RoHS Warranty Limited Warranty: 2 Year Product images may differ from actual product appearance.