Kicker KMF10 10-inch (25cm) Weather-Proof Subwoofer for Freeair Applications, 2-Ohm

About This Item We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it. See our disclaimer The KICKER® KMF Marine Subwoofer makes serious bass without a dedicated enclosure! Made to take the power and the weather, this sub is custom made to bring the bass on your boat. Completely weather-resistant, these marine subs are real-world tested for salt/fog and UV exposure, meeting or exceeding ASTM standards for marine durability. A completely sealed motor structure and locking/sealed terminal cover make it splash-proof for long life, while a tough Santoprene® surround and marine-grade polypropylene cone pump out the bass, no matter how long or loud the party lasts. Packed with features and made for specifically for marine use, KICKER gives you the deep, loud bass your boat needs. FEATURES Two-Ohm Voice Coil Injection-Molded Polypropylene Cone Co-molded Santoprene® Surround UniPlate™ Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Rear Gasketing Included Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure Specifications Woofer(in,mm) 10, 25 Impedance (OHMS) 2 SVC Peak Power Handling(Watts) 350 Continuous Power Handling(Watts RMS) 175 Sealed Enclosure Volume Min-Max(ft³, L) 1-2.4, 28.3-68 Vented Enclosure Volume Min-Max(ft³, L) 1.25-1.75, 35.4-49.6 Frequency Response(Hz) 30-500 Mounting Depth(in, cm) 5, 12.7 Hole Diameter(in, cm) 9-3/16, 23.2 Outer Diameter(in, cm) 10-11/16, 27.1 Whats in the Box: 1 – 10″ Woofer 1 – Back gasket 8 – Mounting screws 8 – Mounting screw clips 1 – Manual Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors. 10″ Freeair Marine Subwoofer Peak: 350 watts RMS: 175 watts Impedance: 2 Ohm Injection-Molded Polypropylene Cone Specifications Brand Kicker Model KMF102 (45KMF102) Manufacturer Part Number 45KMF102 Assembled Product Dimensions (L x W x H) 11.20 x 11.00 x 6.40 Inches